Attributes
| Part Number | M35S46GAEXDCXA |
|---|
Description
- Redundant control can achieve Category 4, PL e, when used with proper safety controls
- Each valve element in the M35 Series is equipped with a solid state pressure sensor for external monitoring
- Monitoring both of these sensors on each actuation and de-actuation of the M35 Series valve provides a diagnostic coverage up to 99%.
- Poppet design that is dirt tolerant, wear compensating for quick response and high flow capacity
- PTFE backup piston rings enhances valve endurance enabling operation with or without in-line lubrication
- Optional Soft-Start Module on energization, allows outlet pressure to increase at a slower rate until it reaches approximately 50% of inlet pressure, at which point the valve will then open fully to finish filling the system at full rate
- Modular port connection allows modular connection to Air Entry System (Lockout Valve, FRLs)
- LED Indicators provides visual display of valve status and aids troubleshooting
- Include built-in silencer module or threaded flange for remote exhaust
- SISTEMA Library available for download
Specifications
| SERIES | M35 |
|---|---|
| VALVE FUNCTION | Redundant 3/2 Single Solenoid |
| CONSTRUCTION | Dual Poppet |
| ACTUATION | Electrical |
| SOFT START | Included |
| LOCKOUT | Not Included |
| MONITORING | External |
| FEEDBACK | PNP Solid State Pressure Sensors |
| RESET | Automatic |
| VOLTAGE | 24 VDC |
| THREAD TYPE | G |
| INLET SIZE | 1/2" |
| OUTLET SIZE | 1/2" |
| EXHAUST SIZE | 1" |
| BASIC SIZE | 8 |
| PORTS 1-2 FLOW | 4.1 Cv (4034 Nl/min) |
| PORTS 2-3 FLOW | 7.57 Cv (7449 Nl/min) |
| FEEDBACK RATING | Contacts - 5 amps at 250 volts AC, or 5 amps at 30 volts DC |
| POWER CONSUMPTION | 2.0 watts |
| SOLENOID CONNECTION | 5-pin M12 |
| FEEDBACK CONNECTION | 5-pin M12 |
| SOLENOID/SENSOR PIN CONFIGURATION | DC |
| OPERATING PRESSURE MAX | 150 psi (10 bar) |
| PILOT SUPPLY | Internal |
| PRESSURE GAUGE | Not Included |
| HEIGHT | 10.31 in (261.9 mm) |
| LENGTH | 3.15 in (80.0 mm) |
| WIDTH | 4.30 in (109.3 mm) |
| WEIGHT | 6.6 lbs (3.0 kg) |
| MOUNTING | Inline |
| AMBIENT TEMPERATURE RANGE | 40 to 120 F (4 to 50 C) |
| MEDIA TEMPERATURE RANGE | 40 to 175 F (4 to 80 C) |
| FLOW MEDIA | Compressed air according to ISO 8573-1 Class 7:4:4 |
| VALVE BODY MATERIAL | Cast Aluminum |
| POPPET/SPOOL MATERIAL | Acetal and Stainless Steel |
| SEAL MATERIAL | Buna-N |
| SAFETY CATEGORY | Category 4 |
| PL RATING | PL e |
| SAFETY INTEGRITY LEVEL | SIL 3 |
| DGUV CERTIFICATION | Yes |
| CE CERTIFICATION | Yes |
| EAC DECLARATION | Yes |
| CSA/UL CERTIFICATION | Yes |