Attributes
| Part Number | MDC2E14XGAEXMXA |
|---|
Description
- Can achieve Category 2, PL c, when used with proper safety controls
- The “fail-to-safe” safety function is ensured as long as the poppet is able to go back into the start position
- The Cat 2 version (MDC2) of the MDC Series is equipped with a solid state pressure sensor.
- Monitoring the sensor on each actuation and de-actuation of the MDC2 Series valve provides a diagnostic coverage between 60% < 90%
- Poppet Design that is dirt tolerant, wear compensating for quick response and high flow capacity
- PTFE backup piston rings enhances valve endurance enabling operation with or without in-line lubrication
- On energization, the Soft-Start (EEZ-ON®) allows outlet pressure to increase at a slower rate until it reaches approximately 50% of inlet pressure, at which point the valve will then open fully to finish filling the system at full rate
- Threaded or modular port connection allows connection to Air Entry System (Lockout Valve, FRLs)
- Threaded exhaust port for canister silencer or remote exhaust
- SISTEMA Library available for download
Specifications
| SERIES | MDC |
|---|---|
| VALVE FUNCTION | 3/2 Single Solenoid |
| ACTUATION | Electrical |
| INLET SIZE | 1/2" |
| THREAD TYPE | G |
| SOFT START | Included |
| LOCKOUT | Not Included |
| MONITORING | External |
| FEEDBACK | Pressure Switch (PNP) |
| RESET | Not Included |
| VOLTAGE | 24 VDC |
| OUTLET SIZE | 1/2" |
| EXHAUST SIZE | 1" |
| BASIC SIZE | 1/2" |
| EXHAUST TYPE | Threaded Female Port |
| PORTS 1-2 FLOW | 3.7 Cv (3600 Nl/min) |
| CONSTRUCTION | Poppet |
| PORTS 2-3 FLOW | 4 Cv (3900 Nl/min) |
| FEEDBACK RATING | 5 amps at 250 volts AC, or 5 amps at 30 volts DC |
| POWER CONSUMPTION | 1.5 watts |
| SOLENOID CONNECTION | M12 |
| FEEDBACK CONNECTION | M12 |
| OPERATING PRESSURE | 30 to 150 psig (2 to 10.3 bar) |
| PRESSURE GAUGE | No Gauge |
| HEIGHT | 6.39 in (162.3 mm) |
| LENGTH | 3.26 in (82.7 mm) |
| WIDTH | 2.62 in (66.6 mm) |
| WEIGHT | 2.05 lbs (0.93 kg) |
| MOUNTING | Inline/Modular |
| AMBIENT TEMPERATURE RANGE | 40 to 120 F (4 to 50 C) |
| MEDIA TEMPERATURE RANGE | 40 to 175 F (4 to 80 C) |
| FLOW MEDIA | Compressed Air |
| VALVE BODY MATERIAL | Aluminum |
| POPPET/SPOOL MATERIAL | Acetal and Stainless Steel |
| SEAL MATERIAL | Buna-N |
| SAFETY CATEGORY | Category 2 |
| PL RATING | PL c |
| SAFETY INTEGRITY LEVEL | SIL 1 |
| DGUV CERTIFICATION | Pending |
| CE CERTIFICATION | Yes |
| EAC DECLARATION | Yes |
| CSA/UL CERTIFICATION | Yes |