Attributes
| Part Number | DM2CDA88C22 |
|---|
Description
- Redundant control can achieve Category 4, PL e, when used with proper safety controls
- Dynamic Monitoring, and air flow control functions are simply integrated into two identical valve elements
- Asynchronous movement of valve elements is detected by the dynamic monitoring and the valve latches in the safe condition, resulting in a residual outlet pressure of less than 1% of supply
- Manual valve reset
- Poppet design that is dirt tolerant, wear compensating for quick response and high flow capacity
- PTFE backup piston rings enhances valve endurance enabling operation with or without in-line lubrication
- Includes a pressure switch with both normally open (NO) and normally closed (NC) contacts to provide status feedback to the control system indicating whether the valve is in the lockout or ready-to-run condition
- High flow, clog resistant silencer included
- Base mounted for ease of valve replacement, captive valve-to-base mounting screws
- Inlet and outlet ports on both sides (plugs for unused ports included)
- SISTEMA Library available for download
Specifications
| SERIES | DM2C Series |
|---|---|
| VALVE FUNCTION | Redundant 3/2 Single Solenoid |
| CONSTRUCTION | Dual Poppet |
| ACTUATION | Electrical |
| SOFT START | Not Included |
| LOCKOUT | Not Included |
| MONITORING | Internal |
| FEEDBACK | Solid State Pressure Sensor |
| RESET | Solenoid |
| VOLTAGE | 230 VAC |
| THREAD TYPE | G |
| INLET SIZE | 1-1/2" |
| OUTLET SIZE | 2" |
| EXHAUST SIZE | 2-1/2" |
| BASIC SIZE | 30 |
| PORTS 1-2 FLOW | 20 Cv (19680 Nl/min) |
| PORTS 2-3 FLOW | 55 Cv (54120 Nl/min) |
| FEEDBACK RATING | Supply Voltage - 8-30 volts DC, Current Consumption <4mA |
| POWER CONSUMPTION | 32 VA inrush; 22 VA holding |
| SOLENOID CONNECTION | EN 175301-803 Form A |
| FEEDBACK CONNECTION | M12 5-pin |
| OPERATING PRESSURE MAX | 120 psig (8.3 bar) |
| PILOT SUPPLY | Internal |
| HEIGHT | 16.87 in (428.5 mm) |
| LENGTH | 9.85 in (250.2 mm) |
| WIDTH | 11.82 in (300.3 mm) |
| WEIGHT | 34.7 lbs (15.1 kg) |
| MOUNTING | Base Mount |
| AMBIENT TEMPERATURE | 15 to 122 F (-10 to 50 C) |
| MEDIA TEMPERATURE | 40 to 175 F (4 to 80 C) |
| FLOW MEDIA | Filtered, lubricated or unlubricated (mineral oils according to DIN 51519, viscosity classes 32-46) |
| VALVE BODY MATERIAL | Cast Aluminum |
| POPPET/SPOOL MATERIAL | Acetal and Stainless Steel |
| SEAL MATERIAL | Buna-N |
| SAFETY CATEGORY | Category 4 |
| PL RATING | PL e |
| SAFETY INTEGRITY LEVEL | SIL 3 |
| DGUV CERTIFICATION | Yes |
| CE CERTIFICATION | Yes |
| EAC DECLARATION | Yes |